STM Technics Doser Mixers

DOMIX 35

The DOMIX 35 is a Water Doser/Mixer with automatic thermostatic mixing.

Structure in stainless steel, 1.5mm thick.

Microprocessor logic with permanent memory.

Internal fittings in bronze, brass and stainless steel.

DOSER DOX 35

The DOX 35 is the Doser of this Series. The delivery temperature is only measured and shown on the display. The structure is in ABS 4 and 5mm thick.

DOMIX 45

The 45 line is formed by electronic Doser-Mixers with 80 different recipes. They are equipped with digital displays for the visualization of the water quantity and for the temperature measured by the external probe. Mixing is set by the regulating knob.

The DOMIX 45A has an automatic by-pass for draining of water not at set temperature, which can be controlled thermostatically or by time. The device has the double function of doser and microdoser: it is possible to set either large batches (up to 999.9l) at a resolution of tenth of litre, or small batches (up to 99.99l) at a resolution of centesimal of litre.

The DOMIX 45 is a Doser-Mixer, similar to the DOMIX 45 A, except for the automatic by-pass, substituted by a manual ball-tap and the lack of the micro-dosing function.

DOSER DOX 45

The DOX 45 (lower photo) is the Doser of the 45 Series. The delivery temperature is only measured and shown on the display.

Options: Stainless steel box, 1,5mm thick; Remote START and STOP controls through clean contacts; manual 3 way fittings kit; Second drain hose for the by-pass.

DOMIX 55 Line

The 55 line is formed by fully automatic Doser-Mixers with 99 different recipes, 49 of them double recipes. LCD-Display is installed for easier management of the machines. Mixing and by-pass are automatic with electronic control through a patented valve able to reach the desired temperature in 4-5 seconds under the worst conditions.

Four models are manufactured: DOMIX 55, DOMIX 55A, DOMIX 65 and DOMIX 65A.

They differ from the internal piping and fittings (1/2", 3/4") and from the automatic three way kit.

Options: Remote START and STOP controls through clean contacts; remote control by RS 422 or RS 485 serial interface; remote cover ; manual 3 way fittings kit ; Second hose, for the by-pass.