Belshaw Donut Robot® Mark II (Gas)

Specify when ordering: Liquid Propane OR Natural Gas
Automatic cake donut depositor, synchronized with fryer conveyor
Stainless steel materials with some aluminum components
On Mark II Gas, ‘Plain’ donut plunger, 1-9/16″ (40mm) diameter. Deposits 2 standard size donuts per conveyor row
On Mark II GP Gas, double 1″ (25.4mm) diameter plunger. Deposits 4 mini donuts per conveyor row
Stainless steel conveyor with flight bar system for advancing donuts
On Mark II Gas, the conveyor’s flight bars are spaced 3¾” (95mm) from center to center. Flight bars are round, 3/8″ (9.5mm) diameter
On Mark II GP Gas, the conveyor’s flight bars are spaced 3″ (76mm) from center-to-center for mini donuts. Flight bars are 3/8″ (9.5mm) diameter.
Aluminum hopper with 10 lbs (4.5kg) batter capacity
Batter weight adjustment dial – allows variation from small to large donuts
Automatic turning of donuts mechanically synchronized with fryer
Automatic dispensing of fried donuts onto collection device such as Roto-Cooler
Frying time dial sets frying times from approximately 55 to 360 seconds
Temperature adjustment (thermostat)
High temperature limit switch – cuts gas and electricity at approximately 450°F
Half-speed switch that reduces automatic cake donut deposits to 1 donut per conveyor row instead of 2. For GP models, 2 per row instead of 4
Not compatible with Belshaw Adamatic’s ‘Insider’ Clean Air Ventless Cabinet
No drain is included; use optional accessory Filter-Flo Siphon

For Mark II Gas: 1-9/16″ Star Plunger. Makes ring donuts with a star shape around the center hole
Mini donut conversion kit. This kit includes mini donut hopper and double plunger, for depositing 4 mini donuts per conveyor row (as used on GP model). Changeover from standard to mini donuts and back again takes less than one minute
Natural Gas and Propane models available (specify at time of ordering)